If you need a lightweight, durable container for lunches or snacks, a thin wall lunch box mould is a good option. These moulds have thinner walls, which allows the product to flow more freely. However, they are more difficult to find and more expensive to manufacture. To find the right one, follow some guidelines. Read on for more information! And remember, a thinner wall mould does not always mean a better product.
To create a sandwich box, choose a mould that can support the sandwich. A thin wall lunch box mould must have the same flow as the sandwich. If it can support the same amount of flow, it's a good choice. A standard lunch box mould can support more than one cavity. A mould that is too thick will break when it's full of sandwich pieces. This is why a thin wall lunch box mould is better for smaller batches.
If you are interested in purchasing a thin wall lunch box mould, look for one that offers the highest quality. A good mould will not have a distinct smell and be of high quality. Some molds have a lid, which helps with removing food, while other moulds are designed to withstand extreme temperatures. When it comes to choosing the right lunch box mould, you need to consider the following factors. There are many factors to consider when choosing a mould for your business. You can see the products of this site if you are interested.
First, look for a mould with a high-speed injection system. A high-speed thin wall lunch box injection mould will be able to process food containers with a wall thickness between 0.4mm and 0.55mm. Some machines may have up to eight cavities, and the cycle time of a thin wall lunch box mould will depend on the type of injection molding machine you choose. A good mould will be able to process 300ml of product in as little as 3.5 seconds.
Next, consider the mold construction design. If the mold is meant for high-speed injection and high pressure, you will want it to have a maximum cooling system. Using a monoblock design for the ejector part will be best for a thin wall mold with multiple cavities. The mold base should have wear plates on all areas that are prone to wear. This type of thin wall mold is suitable for plastic houseware as well as industrial packaging.